Gearbox Springs & Screw Sets

Although Gearbox Spring Sets and Gearbox Screw Sets are small and relatively inexpensive, they play a key role in the reliability of an AEG gearbox. During maintenance or a complete overhaul, these parts are often overlooked, yet it is precisely worn springs or damaged screws that can later cause malfunctions or necessitate unnecessary dismantling.

Go straight to the relevant information:
• Why choose high-quality small components?
• What are small components?
• Why should small parts also be replaced during an overhaul?
• Top brands in Small Components
• Why do experienced technicians often opt for new screws?
• Professional use
• What should you look out for when buying small components?
• Frequently asked questions about small components

In this category, you’ll find high-quality small components from G&G, Guarder, Krytac, Point and Retro Arms. The range consists of gearbox spring sets, gearbox screw sets for Krytac gearboxes and high-quality V2 and V3 screw sets from Retro Arms.

Whether you’re completely overhauling a gearbox or simply want to replace a small part that was damaged during dismantling, with the right small components you can ensure that your gearbox is reassembled reliably and completely.

Why choose high-quality small components?

During a gearbox overhaul, attention is often focused on large components such as gears, motors or pistons. Yet it is precisely the small parts that ensure everything continues to function correctly and remains securely fitted.

By replacing even these small parts in good time, you can prevent an overhaul from being interrupted later on by a loose screw or a worn spring.

What is included under ‘Small Components’?

The ‘Small Components’ category comprises parts that may be small, but are essential for a gearbox to function properly.

A Gearbox Spring Set contains various small springs that are essential for the correct operation of parts such as the Anti Reverse Latch, Trigger, Cut-off Lever and other internal components. After prolonged use, these springs may lose their tension or become damaged or lost during disassembly.

You’ll also find a range of gearbox screw sets in this category. These ensure that the gearbox shell is held firmly together and that internal components are fitted correctly. Particularly if a gearbox has been opened several times, screw heads may become damaged, or it may be advisable to replace the entire set of screws.

Why should small parts also be replaced during an overhaul?

During a complete gearbox upgrade, the large components are often replaced, whilst the original springs and screws are reused. In many cases, this is not a problem, but after several years of intensive use, it is precisely these small parts that may show signs of wear.

A spring that has lost its tension or a damaged screw head can cause unnecessary problems later on. As a Gearbox Spring Set or Screw Set is relatively inexpensive, many experienced airsoft technicians choose to replace these parts as a preventative measure during a service.

It is precisely this attention to the smallest details that ensures a gearbox not only performs well after fitting, but also continues to operate reliably over the long term.

Leading brands in Small Components

In this category, you’ll find high-quality gearbox springs and gearbox screws from manufacturers renowned for their reliable fit and high-quality finish.

Guarder and Retro Arms are popular choices for maintenance and professional gearbox builds thanks to their precise dimensions and durable materials. In addition, G&G, Krytac and Point offer reliable replacement parts for both routine maintenance and complete overhauls.

Practical tip

Are you carrying out a full gearbox overhaul? If so, don’t just check the major components, but also the condition of the gearbox springs and screws. It is precisely these small parts that often determine how reliably a gearbox will continue to function after assembly and prevent you from having to open it up again later.

Why do experienced technicians often opt for new screws?

A gearbox is regularly opened during maintenance or upgrades. After being dismantled several times, screw heads can become worn, making them more difficult to loosen or tighten. The fit may also become less precise when screws are reused frequently.

That is why many experienced airsoft technicians choose to fit a new gearbox screw set straight away when carrying out a full overhaul. This ensures a neat fit, reduces the risk of damaged screw heads and makes future maintenance easier.

Professional use

In a professional gearbox build, a great deal of attention is paid to the smallest details. Experienced airsoft technicians therefore not only replace the major wear parts, but also inspect all springs, screws and other fasteners.

A small spring with insufficient tension or a damaged screw can ultimately have just as much of an impact on the reliability of a gearbox as a worn gear or piston. By replacing these parts in good time, the gearbox will continue to operate reliably and the risk of unexpected breakdowns will be significantly reduced.

What should you look out for when buying small components?

Before purchasing small parts, it is important to determine which parts of your gearbox need replacing and whether they are suitable for your platform.

In this regard, please bear in mind, amongst other things:

• Compatibility with your gearbox (V2, V3 or Krytac).
• The right set of screws for your gearbox shell.
• The quality of the springs and screws.
• Whether you’re carrying out a complete overhaul or simply replacing a single part.
• The condition of the other gearbox components.

By paying attention to the small parts during maintenance, you can prevent a carefully assembled gearbox from causing problems later on.

Small Components binnen de gearbox

Small components may be the smallest parts of an AEG gearbox, but they are essential for reliable operation. Springs ensure that various internal components return correctly to their starting positions, whilst screws hold the gearbox firmly together. Together, they contribute to the long-lasting and trouble-free operation of the entire gearbox.

Are you carrying out a complete gearbox overhaul or replacing several internal parts? If so, be sure to check out our AEG Gearbox Parts category, where you’ll find all the parts you need to rebuild your gearbox fully and reliably.

Common mistakes

As these are relatively small parts, gearbox spring sets and gearbox screw sets are often overlooked during maintenance. Yet it is precisely these parts that can cause unnecessary problems later on.

Common mistakes include:

• Reusing old springs even though they have lost their tension.
• Reuse damaged screw heads.
• Mixing up different screw lengths during assembly.
• Tightening a screw too tightly, causing damage to the thread.
• Losing small parts whilst dismantling the gearbox.
• Thinking that small parts have no impact on the reliability of the replica.

By paying attention to these small components as well, you can avoid a great deal of frustration and ensure that the gearbox continues to operate reliably after an overhaul.

Frequently Asked Questions about Small Components

Do I always have to replace a gearbox spring set during an overhaul?
Not always. If the springs are still in good condition and have sufficient tension, they can often be reused. However, replacement is advisable in the event of wear, deformation or if a spring is missing.

Why should I fit a new gearbox screw set?
After repeated dismantling, screw heads may become damaged or the fit may become less precise. A new screw set ensures a reliable fit and makes future maintenance easier.

Are all gearbox screws the same?
No. Screw sets vary depending on the gearbox and manufacturer. You should therefore always check that you are choosing a screw set that is suitable for your gearbox, such as a Krytac, Version 2 or Version 3 model.

Can a tiny little spring really cause problems?
Yes. Small springs ensure that components such as the Anti-Reverse Latch, Cut-Off Lever and Trigger function correctly. A worn or missing spring can therefore have a direct impact on the gearbox’s operation.

Is a gearbox screw set intended solely as a replacement?
No. Many technicians also use new screw sets when building or overhauling a gearbox from scratch to ensure a neat and reliable assembly.

Advice from Airsoft-Legends

When upgrading a gearbox, most attention is often focused on components such as the motor, gears or piston. Yet it is precisely the small parts that determine whether a carefully assembled gearbox will continue to function reliably in the long term.

We therefore recommend that, during an overhaul, you inspect not only the major wear parts but also the springs, screws and other fasteners. The investment is relatively small, whilst doing so can prevent many unnecessary breakdowns and the need for additional dismantling.

With high-quality Small Components from G&G, Guarder, Krytac, Point and Retro Arms, you can ensure that your gearbox is built to the highest standards, right down to the smallest details. It is precisely this attention to the small parts that ultimately makes the difference between an average and a professionally built AEG.