Free shipping from €99 (NL and BE)
Visit our shop in Capelle aan den IJssel
Returns within 14 working days
Webwinkelkeur
0
0
Free shipping from €99 (NL and BE)
Visit our shop in Capelle aan den IJssel
Returns within 14 working days

Ares HPA Gearbox Set V2 for Tokyo Marui / Ares M4 / DMR AEG Series (Semi-Only) Gen.2

Product description
The ARES HPA Gearbox Set V2 for Tokyo Marui / Ares M4 / DMR AEG Series Semi-Only Gen.2 is a complete HPA engine and gearbox solution for AR15/M4 AEG platforms featuring a Version 2 gearbox and a single-sided fire selector. This Semi-Only version is particularly suitable for DMR builds and other configurations where only semi-automatic fire is requi...

The ARES HPA Gearbox Set V2 for Tokyo Marui / Ares M4 / DMR AEG Series Semi-Only Gen.2 is a complete HPA engine and gearbox solution for AR15/M4 AEG platforms featuring a Version 2 gearbox and a single-sided fire selector. This Semi-Only version is particularly suitable for DMR builds and other configurations where only semi-automatic fire is required. The updated Gen.2 design uses fewer internal components than the first generation and features a reinforced, fully enclosed EFCS unit for a simpler and more reliable system.

Revised Gen.2 design

In the second generation, ARES has simplified the internal HPA engine by reducing the total number of components. Fewer individual parts mean fewer potential points of adjustment and failure within the system. The Gen.2 has therefore been developed with a view to delivering more consistent and reliable performance than the first generation.

Reinforced, fully enclosed EFCS

In the Gen.2, the Electronic Fire Control System unit is housed in a fully enclosed casing. In the first generation, this electronics unit was only partially enclosed. The new design therefore provides the electronics with a better-integrated and more protected position within the gearbox.

Semi-Only version

This specific HEB-004-S model operates exclusively in semi-automatic mode. This sets it apart from the standard HEB-004 Gen.2, which also supports full-auto. The ‘Semi-Only’ configuration makes this model particularly suitable as the basis for a DMR-oriented airsoft build where a semi-automatic firing mode is desired or required.

Complete HPA-engine in V2 gearboxbehuizing

The engine is supplied as a largely complete HPA solution housed in an aluminium V2 gearbox casing. This means that not all conventional AEG components, such as gears, pistons and traditional electric motors, need to be used. The system replaces the mechanical AEG drive with a pneumatic HPA engine.

For AR15 and M4 V2 platforms

The gearbox has been developed for AR15/M4 AEG platforms featuring a Version 2 gearbox and a single-sided fire selector. Installation is most straightforward on compatible ARES platforms. With Tokyo Marui and other V2 brands, modifications may be necessary due to differences in the gearbox shell, selector, hop-up positioning and receiver tolerances.

Tokyo Marui compatibility may require modification

The gearbox is also marketed as being compatible with Tokyo Marui AR15/M4 AEG platforms, but it is explicitly stated that modification may be required. The set should therefore not be regarded as a universal drop-in part for every V2 replica.

Suitable for various HPA sources

The ARES engine can be used with suitable compressed air, CO₂ and gas-based supply systems, provided these are connected via the correct regulated HPA set-up. A suitable air source, regulator and pipework are required for a fully functional configuration.

Recommended operating pressure: 4 to 12 BAR

ARES specifies a recommended pressure range for the system of approximately 4 to 12 BAR, or roughly 58 to 174 PSI. The actual setting must be adjusted to suit the complete replica, the desired performance and the applicable field limits. Always use a suitable HPA regulator and check the final output with a chronograph.

US-type HPA-fitting

This version uses a US-type air line fitting. A standard EU-type HPA line cannot therefore be connected directly. Before purchasing, please check which type of fitting is used on your existing HPA set to avoid the need for additional adaptors or a different line.

Air line via de pistol grip

The air line connection is configured to route through the pistol grip. This allows the line to be routed from the gearbox through the grip to the outside and then connected to the external HPA line.

11.1V LiPo for the electronics

Although the drive is pneumatic, the EFCS electronics still require an electrical power supply. A 11.1V LiPo battery with a Deans/T-Plug connector is used for this purpose. The battery therefore does not supply power to the pneumatic drive itself, but powers the engine’s electronic control system.

Inclusief curved trigger

The set comes with a curved trigger that is designed to work with the HPA system’s electronic trigger unit. This means that the trigger, EFCS and engine form a single integrated basis for the final build.

Aluminium gearbox housing

The external gearbox shell is made from aluminium and finished in black. The housing follows the V2 format used in many AR15/M4 AEG platforms and protects the HPA engine and electronic components inside the receiver.

Practical insights

This Gen.2 Semi-Only version is particularly interesting for a DMR build where you want to fit an electronic HPA engine directly into a V2 platform without retaining a conventional AEG geartrain. However, before dismantling the replica, first check the gearbox size, selector configuration and HPA fitting. Fitting work is particularly important to bear in mind with Tokyo Marui and other non-ARES receivers; unfortunately, ‘V2’ does not automatically mean that every manufacturer uses the same tolerances.

Who is the ARES HPA Gearbox Set V2 Semi-Only Gen.2 suitable for?

The ARES HPA Gearbox Set V2 Semi-Only Gen.2 is suitable for experienced airsoft players, techs and builders who wish to convert an AR15/M4 V2 AEG to HPA and are specifically looking for a semi-automatic configuration. The set is particularly suitable for DMR projects and ARES platforms, but can also be used with Tokyo Marui and other V2 AR platforms provided the necessary technical modifications are carried out.

Specificaties

  • Note: ARES
  • Model: HPA Gearbox Set V2 Gen.2 Semi-Only
  • Colour: Black
  • Producttype: Complete HPA engine / gearbox set
  • Platform: AR15 / M4 / DMR
  • Gearboxplatform: Version 2
  • Compatibele selector: Single-sided fire selector
  • Firing mode: Semi-automatic
  • Full-auto: Nee
  • HPA system: ARES HPA
  • Generation: Gen.2
  • Housing: Aluminium
  • Calibre: 6 mm Airsoft
  • EFCS: Pre-installed
  • EFCS housing: Fully enclosed Gen.2 version
  • Trigger: Curved trigger inbegrepen
  • Power supply for electronics: 11.1V LiPo
  • Battery connection: Deans / T-Plug
  • Battery included: No
  • Battery charger included: No
  • Power source: HPA + batterij
  • Recommended tyre pressure: Approximately 4–12 BAR
  • Recommended tyre pressure: approximately 58–174 PSI
  • HPA-fitting: US-type
  • EU-type HPA-line direct compatible: Nee
  • Air line routing: Via pistol grip
  • Suitable for compressed air: Yes
  • Suitable for CO₂-based dosing: Yes, with a suitable regulated setup
  • Suitable for gas-based supply: Yes, with a suitable regulated setup
  • ARES AR15/M4 V2 compatible: Ja
  • Tokyo Marui AR15/M4 V2 compatible: Yes, modification may be required
  • Other AR15/M4 V2 platforms: Possible, but modification may be required
  • Universal drop-in compatibility: No

Contents of the pack

  • 1x ARES HPA Gearbox Set V2 Gen.2 Semi-Only
  • 1x Pre-installed ARES HPA engine
  • 1x Pre-installed EFCS
  • 1x Curved trigger

Common mistakes

  • Do not assume universal drop-in compatibility; technical modifications may be necessary for Tokyo Marui and other V2 platforms.
  • Before purchasing, check the fitting type of your HPA line; this engine uses a US-type fitting and is not directly compatible with EU-type lines.
  • Never connect an unregulated pressure source directly; use a suitable HPA regulator and ensure that the operating pressure remains within the specified limits.
  • Please note that the EFCS requires a separate 11.1V LiPo battery with a Deans/T-Plug, and that this battery is not included.

Frequently Asked Questions

Is this ARES HPA gearbox suitable for a DMR build?
Yes. This HEB-004-S version supports semi-automatic fire only and is therefore particularly suitable for a DMR-oriented build.

Does this gearbox fit directly into a Tokyo Marui M4?
Not guaranteed. The set is stated as being compatible with Tokyo Marui AR15/M4 V2 platforms, but modification may be necessary.

Which HPA fitting does this engine use?
The system uses a US-type HPA fitting. A standard EU-type air line cannot be connected directly.

Which battery do I need?
The electronic speed controller is designed for an 11.1V LiPo battery with a Deans/T-Plug connector. The battery is not included.

What pressure does the HPA engine use?
The specified recommended pressure range is approximately 4 to 12 BAR / 58 to 174 PSI. The final setting must be adjusted to suit the replica and the applicable field limits.

The ARES HPA Gearbox Set V2 Semi-Only Gen.2 combines a simplified second-generation HPA engine with integrated EFCS and an aluminium V2 housing with a specific semi-automatic configuration, thereby providing an interesting basis for an M4- or DMR-oriented HPA build.

 

Product specifications

Article number
HEB-004-S
Brand
Ares
Type
HPA Gearbox Set V2 for Tokyo Marui / Ares M4 / DMR AEG Series (Semi-Only) Gen.2

Reviews

0 / 5Based on 0 reviews

There are no reviews written yet about this product..

Create your own review

Previously viewed

Compare 0

Add another product (max. 5)

Start comparison