MP TGD QD Short Vertical Grip Dark Earth

The MP TGD QD Short Vertical Grip Dark Earth is a compact vertical foregrip for airsoft replicas fitted with a 20mm Picatinny rail. Thanks to the Quick Detach system, the grip can be fitted or removed quickly, whilst its short design provides extra grip without the need to attach a large foregrip to the replica.

The grip is made from injection-moulded polymer and weighs just 90 grams. On the underside is a lockable storage compartment in which, for example, a small battery or other compact accessory can be carried. The sealed construction is dust- and splash-proof, ensuring the grip remains practical during outdoor skirmishes and milsim events.

Compact vertical grip for greater control

Measuring approximately 9 cm, the TGD QD is one of the more compact vertical grips. This provides a clear grip point for your supporting hand without making the replica unnecessarily tall when it is set down or whilst moving through confined spaces.

You can traditionally grip it entirely by hand, but it can also be used as a reference point for a more forward-leaning grip technique. Which position works best depends on your replica, arm length and personal playing style.

Quick Detach for quick assembly

A key difference compared with a simple bolted-on foregrip is the QD system. The quick-release lever allows the grip to be quickly attached to or removed from a suitable Picatinny rail.

This is handy if you regularly change the configuration or want to make the replica more compact for transport. It also means you don’t have to get tools out every time the grip needs to be temporarily removed.

For 20mm Picatinny rails

The MP TGD QD Short Vertical Grip is designed for a standard 20mm Picatinny interface. This means it can be used on many airsoft replicas and handguards that have a suitable Picatinny rail on the underside.

If you only have M-LOK or KeyMod without a Picatinny rail fitted, this grip cannot be fitted directly to it. In that case, you will first need a suitable rail adapter.

Lightweight polymer construction

The grip is made from injection-moulded polymer. Weighing approximately 90 grams, it adds relatively little mass to the front of the replica.

This is particularly useful for replicas that already have several accessories fitted. After all, an optic, a weapon light, a PEQ-style unit and other accessories quickly add up in weight. A foregrip doesn’t need to add another half a brick’s worth of weight unnecessarily.

Lockable storage compartment

On the underside there is a removable end cap. Behind it is a small internal storage compartment in which, for example, a suitable spare battery or other small accessory can be carried.

The sealed design is described as dust- and splash-resistant. This makes the compartment suitable for small items that you wish to protect to some extent from dirt and splashing water. However, ‘splash-resistant’ does not mean that the compartment is intended for prolonged immersion or is guaranteed to be completely watertight.

Dark Earth for tactical builds

This version comes in the colour Dark Earth and therefore complements replicas and accessories in Tan, FDE, Coyote and similar earth tones. The colour is ideal, for example, for a two-tone M4, SCAR or other tactical build.

Exact shades may vary between different manufacturers and materials. Dark Earth should therefore not automatically be regarded as exactly the same colour as any other FDE or Tan component.

Airsoft, CQB en milsim

Its short design makes the TGD QD an attractive option for both standard airsoft skirmishes and CQB and milsim. In confined CQB environments, the grip remains relatively compact, whilst in outdoor use it provides a clear and consistent grip point for the supporting hand.

For longer milsim events, its light weight is particularly welcome. In addition, the internal compartment can be used to store a small spare part or a compatible battery with the replica, so that it doesn’t have to be tucked away at the bottom of a pouch.

Practical insights

The MP TGD QD Short Vertical Grip Dark Earth is particularly appealing to players who want the grip of a vertical grip but do not need a long foregrip beneath their handguard. When fitting it, experiment with its position on the rail. Moving it a few slots forwards or backwards can make a noticeable difference to the position of your wrist, arm and shoulder.

After securing the replica, check that the QD mechanism is correctly locked and that there is no excessive movement between the grip and the rail. The fit may vary slightly from rail to rail due to manufacturing tolerances. You should also always check that the storage compartment is properly sealed before using the replica in wet or muddy conditions.

Who is the MP TGD QD Short Vertical Grip Dark Earth suitable for?

The MP TGD QD Short Vertical Grip Dark Earth is suitable for airsoft players who wish to fit a compact vertical grip to their replica with a Picatinny rail. It is particularly appealing when low weight, quick disassembly and a relatively short design are important.

The combination of the QD system and the internal storage compartment also makes the grip an attractive option for players who regularly adjust their loadout. For replicas featuring only M-LOK or KeyMod, an additional Picatinny adapter is required.

Specificaties

• Brand: MP
• Model: TGD QD Short Vertical Grip
• Producttype: Vertical grip / foregrip
• Railinterface: 20mm Picatinny
• Montagesysteem: QD / Quick Detach
• Quick-release hendel: Ja
• Material: Injection-moulded polymer
• Surface: Textured
• Internal storage compartment: Yes
• Removable cap: Yes
• Dust-resistant construction: Yes
• Splash-proof design: Yes
• Length: Approximately 9 cm
• Width: Approximately 6 cm
• Height: Approximately 5.5 cm
• Weight: approx. 90 g
• Kleur: Dark Earth
• Suitable for M-LOK without an adapter: No
• Suitable for KeyMod without an adapter: No
• Application: Airsoft

Common mistakes

• Do not mount the grip directly onto M-LOK or KeyMod; this version is designed for a Picatinny rail.
• After fitting, always check that the QD mechanism is fully locked.
• Don’t assume that the most forward mounting position is automatically the most comfortable one. Experiment with different rail positions.
• Do not place any items in the storage compartment that are too large to allow the cap to close properly.
• Do not mistake splash-proof for fully waterproof or suitable for submersion.
• Do not use the grip as a handle to lift the entire replica.
• Don’t expect Dark Earth to be exactly the same shade as every Tan, FDE or Coyote component.
• If the product is used intensively, check regularly that the grip is still secure and that there is no unwanted play on the rail.

Frequently Asked Questions

Which rail system is the MP TGD QD Short Vertical Grip compatible with?
The grip is designed for a 20mm Picatinny rail.

Does this grip have a Quick Detach system?
Yes. The TGD QD features a quick-release system that allows the grip to be fitted and removed relatively quickly.

Does the grip fit directly onto M-LOK?
No. If your handguard has only M-LOK slots, you’ll first need a suitable M-LOK-to-Picatinny rail section.

How long is the foregrip?
The specified length is approximately 9 cm, making it a relatively compact vertical foregrip.

How much does the MP TGD QD Short Vertical Grip weigh?
The Dark Earth version has a stated weight of approximately 90 grams.

Does the handle have a storage compartment?
Yes. There is a lockable compartment at the bottom for a small battery or other compact accessory.

Is the storage compartment waterproof?
The design is described as dust- and splash-resistant. This should not be interpreted as a guarantee of waterproofing in the event of complete or prolonged submersion.

Is the handle made of aluminium?
No. The handle is made of injection-moulded polymer.

Is this grip suitable for CQB?
Yes. Its short design and light weight make it an attractive option for compact CQB set-ups where a long vertical grip is less desirable.

Can I also use the grip for milsim?
Yes. Its compact dimensions, Picatinny rail, quick-detach functionality and internal storage compartment also make it practical for milsim and outdoor set-ups.

The MP TGD QD Short Vertical Grip Dark Earth combines a compact 9 cm design weighing just 90 grams, quick-detach (QD) mounting and a lockable storage compartment to provide a practical upgrade for airsoft replicas fitted with a Picatinny rail.