Helikon-Tex Tourniquet Pouch Multicam®







The Helikon-Tex® Tourniquet Pouch MultiCam® is a compact pouch designed to carry a standard tourniquet – particularly CAT-type models – safely and within easy reach. The pouch combines a simple hook-and-loop flap with a non-slip grip, two elastic loops for a marker and flexible attachment options. Thanks to MOLLE/PALS compatibility and support for straps up to 45 mm, the pouch can be carried both horizontally and vertically on various tactical configurations.
Designed for standard tourniquets
The pouch has been designed for standard tourniquets and is specifically tailored to commonly used CAT-type models. Thanks to its compact design, the tourniquet remains protected and organised on the kit, whilst at the same time remaining quickly accessible when needed.
Quick access via a hook-and-loop flap
The top is secured with a simple hook-and-loop flap. At one end, there is a non-slip grip that makes it easy to open the flap, even when wearing gloves. The design has been deliberately kept simple so that as few steps as possible are required to access the contents.
Two elastic marker loops
On the side there are two elastic loops for a compact marker. This allows a marker to be carried in a single fixed position alongside the tourniquet, ensuring it remains easily accessible without the need for a separate pouch.
MOLLE/PALS compatible
The Tourniquet Pouch can be attached to suitable plate carriers, chest rigs, tactical belts, rucksacks and other modular equipment via the integrated MOLLE/PALS system. This allows the pouch to be mounted in a position that suits the user’s personal loadout.
Horizontal and vertical mounting
As well as MOLLE/PALS, the pouch can be worn directly on a belt up to 45 mm wide. Depending on the configuration, both horizontal and vertical mounting are possible. This provides extra freedom when choosing a position where the tourniquet remains easily accessible.
Cordura® 500D construction
The pouch is made from 100% nylon Cordura® 500D with a fabric weight of approximately 263 g/m². The fabric offers good resistance to wear and tear and intensive use without making the pouch unnecessarily heavy.
DWR water-repellent treatment
The outer fabric has a DWR treatment which helps to minimise the absorption of moisture and dirt. This makes the material easier to keep clean and provides the contents with extra protection against light exposure to moisture. However, the DWR finish does not make the pouch completely waterproof.
Drainage opening
There is a drainage opening at the bottom. Any water that may have got in can drain out more easily through this, rather than collecting at the bottom of the pouch.
Compact and lightweight
Measuring approximately 15 × 5 × 5 cm and weighing around 40 grams, the pouch takes up very little space on a plate carrier or belt. This means it can easily be positioned alongside magazine, radio or utility pouches without taking up a large amount of MOLLE space.
MultiCam® version
This version is made from MultiCam® and can therefore be easily combined with plate carriers, belts and other tactical gear in the same camouflage pattern. The colour scheme also complements Coyote Brown, Ranger Green and similar earth tones.
Practical insights
With a tourniquet pouch, the mounting position is just as important as the pouch itself. Position it somewhere you can reach it easily without having to remove other equipment first, and check after fitting that the flap can be opened fully. In airsoft and milsim loadouts, it is also advisable to keep medical equipment clearly separate from replica or training equipment, so that there is no confusion when genuine first aid is required.
Who is the Helikon-Tex® Tourniquet Pouch MultiCam® suitable for?
The Helikon-Tex® Tourniquet Pouch MultiCam® is suitable for airsoft players, milsim enthusiasts, outdoor enthusiasts and others who wish to carry a standard tourniquet on their kit in a compact and easily accessible manner. The ability to attach the pouch via MOLLE/PALS or directly to a belt makes it suitable for a wide range of plate carrier, chest rig and belt configurations.
Specificaties
- Note: Helikon-Tex®
- Model: Tourniquet Pouch
- Kleur / camouflage: MultiCam®
- Producttype: Tourniquet pouch
- Suitable for: Standard tourniquets, including CAT-type models
- Main material: Cordura® 500D
- Material composition: 100% nylon
- Material weight: Approximately 263 g/m²
- Weight: approx. 40 g
- Dimensions: Approx. 15 × 5 × 5 cm
- Sluiting: Hook-and-loop flap
- Non-slip pull tab: Yes
- Elastic marker loops: 2
- Drainage opening: Ja
- DWR treatment: Yes
- MOLLE/PALS compatible: Ja
- Suitable for belt attachment: Yes
- Maximum strap width: 45 mm
- Vertical installation: Yes
- Horizontal installation: Yes
Contents of the pack
- 1x Helikon-Tex® Tourniquet Pouch MultiCam®
Common mistakes
- Check beforehand that the tourniquet you are using is the right size to fit into the pouch.
- Do not fit the pouch in a position that is difficult to reach with one or both hands.
- Please do not confuse this MultiCam® version with the newer Cordura® 500D Field version, which has different material specifications.
- Do not regard the DWR finish as providing complete waterproofing.
- Check regularly that the MOLLE/PALS attachment, flap and elastic marker loops are still securely fastened.
Frequently Asked Questions
Will a CAT tourniquet fit in this pouch?
Yes. The pouch has been specifically designed for standard tourniquets and, in particular, for commonly used CAT-type models.
Can the pouch be attached to MOLLE/PALS?
Yes. The pouch is MOLLE/PALS-compatible and can be mounted on suitable plate carriers, chest rigs, belts and rucksacks.
Can I wear the pouch directly on a belt?
Yes. It can be attached directly to a belt up to approximately 45 mm wide.
Can the pouch be fitted horizontally?
Yes. Both horizontal and vertical fitting are possible, depending on the chosen carrying method and equipment.
What are the elastic loops on the side for?
The two elastic loops are designed to hold a small marker.
Is a tourniquet included?
No. The Helikon-Tex® Tourniquet Pouch is supplied as a separate pouch; a tourniquet and marker are not included.
The Helikon-Tex® Tourniquet Pouch MultiCam® offers a compact and flexible way to carry a standard tourniquet in an organised and easily accessible manner on MOLLE/PALS gear or a belt.

Product specifications
- Article number
- MO-GTP-CD-34
- Weight unpackaged
- 40 gr
- Brand
- Helikon-Tex
- Type
- Tourniquet pouch
- Kind
- Utility pouch
- Camo
- Multicam®
- Mollé attachment
- icon-yes-circle-fill
- Row amount
- 1
























