Ares HPA Gearbox Set V2 for Tokyo Marui / Ares M4 AEG Series Gen.2





The ARES HPA Gearbox Set V2 for Tokyo Marui / Ares M4 AEG Series Gen.2 is a complete HPA engine and gearbox set for AR15/M4 AEG platforms featuring a Version 2 gearbox and a single-sided fire selector. This version supports both Semi-Auto and Full-Auto and combines an aluminium V2 housing with a pre-installed electronic fire control unit. The updated Gen.2 design uses fewer internal components than the first generation and features a fully enclosed EFCS, resulting in a simpler, more consistent and more reliable system.
Revised Gen.2 design
The second generation of the ARES HPA system uses a simplified engine design with fewer individual components. This means there are fewer parts that could cause problems during assembly, adjustment or use. The result is a more straightforward system that has been developed with a view to ensuring more consistent and reliable operation.
Fully enclosed Gen.2 EFCS
In this Gen.2 version, the pre-installed Electronic Fire Control System is housed in a fully enclosed casing. In the first generation, the EFCS was only partially enclosed. The redesigned construction therefore provides the electronics with a better-integrated and more protected position within the gearbox.
Semi- en Full-Auto
This specific HEB-004 supports both semi-automatic and fully automatic fire. This clearly distinguishes it from the HEB-004-S, which supports semi-automatic fire only. This version is therefore suitable for general M4/AR15 builds where both firing modes are required.
Complete HPA-engine in V2-behuizing
The set is supplied as a virtually complete HPA solution in an aluminium Version 2 gearbox housing. The conventional AEG drive system, comprising gears, a piston and a motor, is replaced by a pneumatic engine controlled by the integrated electronics.
For AR15 and M4 V2 platforms
The gearbox has been developed for AR15/M4 AEG platforms with a V2 gearbox and a single-sided fire selector. Compatibility is most straightforward with suitable ARES replicas. With Tokyo Marui and other brands, modifications may be required due to differences in receivers, selector components and manufacturing tolerances.
Tokyo Marui compatibiliteit
The set is also stated to be compatible with Tokyo Marui AR15/M4 AEG platforms with a V2 gearbox, but modification may be required. The system should therefore not be regarded as a universal drop-in part for just any V2 replica.
Suitable for various HPA sources
The ARES engine can be used with suitable compressed air, CO₂ and gas-based supply systems, provided that a suitable regulated HPA setup is used. For a fully functional configuration, a suitable pressure source, regulator and air line are required in addition to the gearbox.
Recommended operating pressure: 4 to 12 BAR
ARES specifies a recommended pressure range of approximately 4 to 12 BAR, or roughly 58 to 174 PSI. The final setting must always be adjusted to suit the replica, its internal configuration and the applicable field limits. Always check the final performance using a suitable chronograph.
US-type HPA-fitting
This version is fitted with a US-type air line fitting. As a result, a standard EU-type HPA line cannot be connected directly. Before purchasing, please check which type of fitting is used on your existing HPA kit.
Air line via de pistol grip
The air line is configured to route through the pistol grip. This means that the HPA connection runs from the gearbox through the grip to the outside, where it can then be connected to a suitable external HPA line.
11.1V LiPo for the electronics
Although the replica is pneumatically powered, the electronic control system still requires an electrical power supply. For this purpose, the HEB-004 uses a 11.1V LiPo battery with a Deans/T-Plug connector. The battery powers the EFCS and the electronic control system and is not supplied as standard.
Inclusief curved trigger
The set comes with a curved trigger that is designed to work with the system’s electronic trigger unit. The trigger, EFCS and engine thus form the basis of the HPA configuration.
Aluminium gearbox housing
The gearbox shell is made from aluminium and finished in black. The housing follows the familiar Version 2 design and protects both the HPA engine and the electronic components inside the receiver.
Practical insights
The HEB-004 Gen.2 is particularly of interest to modders who wish to convert an existing M4/AR15 AEG to HPA whilst retaining both semi-automatic and full-automatic fire modes. Before dismantling the replica, always check that it is indeed a V2 platform with a single-sided selector switch and note which type of fitting your HPA system uses. Fitting work may be required, particularly with Tokyo Marui and other non-ARES receivers; Version 2 is a gearbox standard, but there is no guarantee that every receiver will be identical down to the last millimetre.
Who is the ARES HPA Gearbox Set V2 Gen.2 suitable for?
The ARES HPA Gearbox Set V2 Gen.2 is suitable for experienced airsoft players, technicians and custom builders who wish to convert an AR15/M4 AEG to HPA whilst retaining both semi-automatic and fully-automatic fire modes. Users of compatible ARES platforms in particular benefit from direct compatibility, whilst Tokyo Marui and other V2 platforms can also be used provided the necessary technical modifications are carried out.
Specificaties
- Note: ARES
- Model: HPA Gearbox Set V2 Gen.2
- Colour: Black
- Producttype: Complete HPA engine / gearbox set
- Platform: AR15 / M4
- Gearboxplatform: Version 2
- Compatibele selector: Single-sided fire selector
- Vuurmodus: Semi-Auto / Full-Auto
- Semi-automatic: Yes
- Full-Auto: Ja
- HPA system: ARES HPA
- Generation: Gen.2
- Housing: Aluminium
- Calibre: 6 mm Airsoft
- EFCS: Pre-installed
- EFCS housing: Fully enclosed Gen.2 version
- Trigger: Curved trigger inbegrepen
- Power supply for electronics: 11.1V LiPo
- Battery connection: Deans / T-Plug
- Battery included: No
- Battery charger included: No
- Power source: HPA + batterij
- Recommended tyre pressure: Approximately 4–12 BAR
- Recommended tyre pressure: approximately 58–174 PSI
- HPA-fitting: US-type
- EU-type HPA-line direct compatible: Nee
- Air line routing: Via pistol grip
- Suitable for compressed air: Yes
- Suitable for CO₂-based dosing: Yes, with a suitable regulated setup
- Suitable for gas-based supply: Yes, with a suitable regulated setup
- ARES AR15/M4 V2 compatible: Ja
- Tokyo Marui AR15/M4 V2 compatible: Yes, modification may be required
- Other AR15/M4 V2 platforms: Possible, but modification may be required
- Universal drop-in compatibility: No
Contents of the pack
- 1x ARES HPA Gearbox Set V2 Gen.2
- 1x Pre-installed ARES HPA engine
- 1x Pre-installed EFCS
- 1x Curved trigger
Common mistakes
- Do not assume universal drop-in compatibility; modifications may be necessary for Tokyo Marui and other V2 platforms.
- Before purchasing, check the fitting type of your HPA line; this engine uses a US-type fitting and is not directly compatible with EU-type lines.
- Always use a suitable, regulated HPA system and set the pressure within the recommended limits and applicable field limits.
- Please note that the EFCS requires a separate 11.1V LiPo battery with a Deans/T-Plug, and that this battery is not included.
Frequently Asked Questions
What is the difference between the HEB-004 and the HEB-004-S?
The HEB-004 supports both semi-automatic and fully automatic modes. The HEB-004-S is the semi-automatic-only version.
Does this gearbox fit directly into a Tokyo Marui M4?
Not guaranteed. The set is stated as being compatible with Tokyo Marui AR15/M4 V2 platforms, but modification may be necessary.
Which HPA fitting does this engine use?
The system uses a US-type HPA fitting. A standard EU-type air line cannot be connected directly.
Which battery do I need?
The electronic control unit uses an 11.1V LiPo battery with a Deans/T-Plug connector. The battery is not included.
What is the recommended operating pressure?
ARES specifies a recommended range of approximately 4 to 12 BAR / 58 to 174 PSI. The final setting must be adjusted to suit the replica and the applicable field limits.
The ARES HPA Gearbox Set V2 Gen.2 combines a simplified second-generation HPA engine with a fully enclosed EFCS, semi-automatic and fully automatic functionality, and an aluminium V2 housing, thereby providing a complete foundation for an M4- or AR15-based HPA build.

Product specifications
- Article number
- HEB-004
- Brand
- Ares
- Type
- HPA Gearbox Set V2 for Tokyo Marui / Ares M4 AEG Series Gen.2



















